Ripping an Album with Audacity: Difference between revisions

Latest revision as of 01:21, 1 September 2024

Process to far

reference:

Effect > Volume and Compression > Normalize

Use Effect > High Pass Filter with a setting of 24 dB per octave roll-off, and a cutoff frequency of 20 - 30 Hz

removing high pitched squeal

1. select all

2. analyze -> plot spectrum

trial and error process, find a peak, note it's frequency 10902Hz

then efect -> notch filter frequency = 10902 , then bottom slider all the way to 20

Resources / Reading:

@@ Line 5: / Line 5: @@
 # noise removal
 # click removal
+# split tracks
+# export to mp3
 reference:
@@ Line 10: / Line 12: @@
 http://manual.audacityteam.org/man/sample_workflow_for_lp_digitization.html
+== Normalize ==
-removing hight pitched squeel
+Effect > Volume and Compression > Normalize
+== noise removal ==
+Use Effect > High Pass Filter with a setting of 24 dB per octave roll-off, and a cutoff frequency of 20 - 30 Hz
+== click removal ==
+== split tracks ==
+== export to mp3 ==
+removing high pitched squeal
 https://www.youtube.com/watch?v=Rh62itfhmV4
@@ Line 17: / Line 34: @@
 . select all
-. analyse -> plot spectrum
+. analyze -> plot spectrum
+trial and error process, find a peak, note it's frequency 10902Hz
+then efect -> notch filter frequency = 10902 , then bottom slider all the way to 20
+Resources / Reading:
+* [https://manual.audacityteam.org/man/faq_recording_troubleshooting.html FAQ:Recording - Troubleshooting]
+* [https://wiki.audacityteam.org/wiki/Improving_Recording_Quality Improving Recording Quality]
-trial and error process, find a peak, not it's frequency 10902Hz
-then efect -> notch filter frequency = 10902 , then bottom slider all the way to 20
+[[Category:Music]]