Uc500: Difference between revisions
From Federal Burro of Information
Jump to navigationJump to search
(→PPPOE) |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 10: | Line 10: | ||
reload | reload | ||
turn on the web server: | |||
ip http server | |||
ip http authentication local | |||
ip http secure-server | |||
ip http path flash:/gui | |||
== Network config == | == Network config == | ||
| Line 16: | Line 23: | ||
net range: 10.201.2.193 - 10.201.2.198<br> | net range: 10.201.2.193 - 10.201.2.198<br> | ||
mask 255.255.255.248 /29<br> | mask 255.255.255.248 /29<br> | ||
upstream Modem is a speedstream 5200 | |||
== Physical == | == Physical == | ||
| Line 46: | Line 55: | ||
128K bytes of non-volatile configuration memory. | 128K bytes of non-volatile configuration memory. | ||
990864K bytes of ATA CompactFlash (Read/Write) | 990864K bytes of ATA CompactFlash (Read/Write) | ||
</pre> | |||
<pre> | |||
mummu#service-module integrated-Service-Engine 0/0 status | |||
Service Module is Cisco Integrated-Service-Engine0/0 | |||
Service Module supports session via TTY line 2 | |||
Service Module is in Steady state | |||
Getting status from the Service Module, please wait.. | |||
Cisco Unity Express 3.0.3 | |||
CUE running on UC500 | |||
mummu# | |||
</pre> | </pre> | ||
| Line 95: | Line 117: | ||
1005 trnet 101005 1500 - - 1 ibm - 0 0 | 1005 trnet 101005 1500 - - 1 ibm - 0 0 | ||
</pre> | </pre> | ||
=== PPPOE === | |||
* http://packetlife.net/blog/2009/apr/20/configuring-pppoe/ | |||
<pre> | |||
07:43 <Holos> interface Dialer0 | |||
07:43 <Holos> description $FW_OUTSIDE$ | |||
07:43 <Holos> ip address negotiated | |||
07:43 <Holos> ip mtu 1492 | |||
07:43 <Holos> ip nat outside | |||
07:43 <Holos> ip virtual-reassembly | |||
07:43 <Holos> encapsulation ppp | |||
07:43 <Holos> ip tcp adjust-mss 1300 | |||
07:43 <Holos> dialer pool 1 | |||
07:43 <Holos> dialer-group 1 | |||
07:43 <Holos> ppp authentication pap callin | |||
07:43 <Holos> ppp pap sent-username cosstatic@vianet.on.ca password 7 .......... | |||
07:43 <Holos> crypto map aesmap ## Your will probably be different | |||
</pre> | |||
[[Category:Cisco]] | |||
Latest revision as of 17:08, 22 May 2012
Commands of note
search flash for config
flash | i cfg
copy flash:filename.cfg startup-config
restore-facotry-config
reload
turn on the web server:
ip http server ip http authentication local ip http secure-server ip http path flash:/gui
Network config
ip: 10.201.2.193
net range: 10.201.2.193 - 10.201.2.198
mask 255.255.255.248 /29
upstream Modem is a speedstream 5200
Physical
show version:
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW9, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Sat 09-Aug-08 22:55 by prod_rel_team ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1) mummu uptime is 40 minutes System returned to ROM by power-on System image file is "flash:uc500-advipservicesk9-mz.124-11.XW9"
MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20 14 User Licenses 10 FastEthernet interfaces 2 terminal lines 4 Voice FXO interfaces 4 Voice FXS interfaces 1 Voice MoH interface 1 802.11 Radio 1 cisco service engine(s) 128K bytes of non-volatile configuration memory. 990864K bytes of ATA CompactFlash (Read/Write)
mummu#service-module integrated-Service-Engine 0/0 status Service Module is Cisco Integrated-Service-Engine0/0 Service Module supports session via TTY line 2 Service Module is in Steady state Getting status from the Service Module, please wait.. Cisco Unity Express 3.0.3 CUE running on UC500 mummu#
Interfaces
Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned NO unset up up In0/0 unassigned NO unset up up FastEthernet0/1/0 unassigned YES unset initializing down FastEthernet0/1/1 unassigned YES unset initializing down FastEthernet0/1/2 unassigned YES unset initializing down FastEthernet0/1/3 unassigned YES unset initializing down FastEthernet0/1/4 unassigned YES unset initializing down FastEthernet0/1/5 unassigned YES unset initializing down FastEthernet0/1/6 unassigned YES unset initializing down FastEthernet0/1/7 unassigned YES unset initializing down FastEthernet0/1/8 unassigned YES unset initializing down Dot11Radio0/5/0 unassigned NO unset initializing down Vlan1 unassigned YES unset up down
vlans-switch
mummu#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1/0, Fa0/1/1, Fa0/1/2
Fa0/1/3, Fa0/1/4, Fa0/1/5
Fa0/1/6, Fa0/1/7, Fa0/1/8
100 VLAN0100 active
102 VLAN0102 active
111 VLAN0111 active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 1002 1003
100 enet 100100 1500 - - - - - 0 0
102 enet 100102 1500 - - - - - 0 0
111 enet 100111 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 1 1003
1003 tr 101003 1500 1005 0 - - srb 1 1002
1004 fdnet 101004 1500 - - 1 ibm - 0 0
1005 trnet 101005 1500 - - 1 ibm - 0 0
PPPOE
07:43 <Holos> interface Dialer0 07:43 <Holos> description $FW_OUTSIDE$ 07:43 <Holos> ip address negotiated 07:43 <Holos> ip mtu 1492 07:43 <Holos> ip nat outside 07:43 <Holos> ip virtual-reassembly 07:43 <Holos> encapsulation ppp 07:43 <Holos> ip tcp adjust-mss 1300 07:43 <Holos> dialer pool 1 07:43 <Holos> dialer-group 1 07:43 <Holos> ppp authentication pap callin 07:43 <Holos> ppp pap sent-username cosstatic@vianet.on.ca password 7 .......... 07:43 <Holos> crypto map aesmap ## Your will probably be different
