Esp32

esp32-c3-devkitC-02

I got some esp32-c3-devkitC-02

Reference: https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/hw-reference/esp32c3/user-guide-devkitc-02.html

from the hardware schematic i seethe RGB LED is SK68XXMINI-HS

I used adafruit neopixel library to drive this RGB LED. it's one wire or i2c or something. Pin 8

https://www.rose-lighting.com/wp-content/uploads/sites/53/2020/05/SK68XX-MINI-HS-REV.04-EN23535RGB-thick.pdf

talk to it via I2C

damn trying to get the boot flashed.

this is what I'm going on now:

https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html

board manager extras:

https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json

old config:

https://dl.espressif.com/dl/package_esp32_index.json,
http://arduino.esp8266.com/stable/package_esp8266com_index.json

This page has some particulars:

https://www.smart-prototyping.com/blog/How%20to%20Install-ESP32-Core-Arduino-IDE

c3 02

image:esp32-c3_devkitM-1_pinlayout.png

esp32 c3 devkitm-1 ( mini)

I'm having a lot of trouble with esp32-c3-mini-1

I can use arduino to flash stuff, but the script never starts.

Serial monitor show 0x7 and 0x10 on repeating cycle.

I think it needs series of pin setting on boot to work.

https://arduino.stackexchange.com/questions/86177/how-arduino-ide-work-with-esp32

esp32 stuff

<a href="/index.php/File:Esp32-c3_devkitM-1_pinlayout.png" class="image"><img alt="Esp32-c3 devkitM-1 pinlayout.png" src="/images/e/e0/Esp32-c3_devkitM-1_pinlayout.png" decoding="async" width="400" height="300"></a>

so which pins are for I2C SDA/SCL ?

Lots of conflicting docs.

I forced the issue like this:

void setup() {
  Wire.setPins(sda_pin, scl_pin);
  Wire.begin();
...
}

want to make the on board neopixel work? use the neopixel library and set pin to 8.

Here is a web server that exposes BME 280 sensors in a prometheus friendly way:

https://github.com/drthornt/arduino_projects/blob/master/webserver_and_neopixel/webserver_and_neopixel.ino

• uses neopixel to communicate wifi communication status
• uses serial for diag debug output.

ESP32-C3 Mini Development Board

sparkfun board

aka WRL-18036

basedon ESP32-C3-MINI-1 chip

https://www.sparkfun.com/products/18036

gotchas:

set I2C wires to pin 0 and pin1 , means pin 9 and 10 on the board

#define I2C_SDA 0
#define I2C_SCL 1

...
void setup()
{
  Wire.setPins(I2C_SDA, I2C_SCL);
  Wire.begin();
  ...
}

Scripts

• /esp32_neo_pixel

• /esp32_i2c_scanner - it's possible to talk i2c over several pairs. In fact it's not clear if the default works. https://docs.espressif.com/projects/arduino-esp32/en/latest/tutorials/io_mux.html#usage-examples

• /esp32_bme680_http