Esp32: Difference between revisions
Line 70: | Line 70: | ||
I could not get this to worrk: https://docs.espressif.com/projects/esp-at/en/latest/esp32c3/Get_Started/Hardware_connection.html | I could not get this to worrk: https://docs.espressif.com/projects/esp-at/en/latest/esp32c3/Get_Started/Hardware_connection.html | ||
esptool.py under windows used : | |||
<pre> | |||
C:\Users\user>C:\Users\north\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.11_qbz5n2kfra8p0\LocalCache\local-packages\Python311\Scripts\esptool.py.exe --chip esp32c3 --port COM10 flash_id | |||
esptool.py v4.5.1 | |||
Serial port COM10 | |||
Connecting.... | |||
Chip is ESP32-C3 (revision v0.3) | |||
Features: WiFi, BLE | |||
Crystal is 40MHz | |||
MAC: 58:cf:79:e3:1d:d8 | |||
Uploading stub... | |||
Running stub... | |||
Stub running... | |||
Manufacturer: 20 | |||
Device: 4016 | |||
Detected flash size: 4MB | |||
Hard resetting via RTS pin... | |||
</pre> | |||
=== esp32 stuff === | === esp32 stuff === |
Revision as of 03:15, 6 September 2023
esp32-c3-devkitC-02
I got some esp32-c3-devkitC-02
from the hardware schematic i seethe RGB LED is SK68XXMINI-HS
I used adafruit neopixel library to drive this RGB LED. it's one wire or i2c or something. Pin 8
talk to it via I2C
damn trying to get the boot flashed.
this is what I'm going on now:
https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html
board manager extras:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json
old config:
https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json
This page has some particulars:
https://www.smart-prototyping.com/blog/How%20to%20Install-ESP32-Core-Arduino-IDE
c3 02
image:esp32-c3_devkitM-1_pinlayout.png
esp32 c3 devkitm-1 ( mini)
I'm having a lot of trouble with esp32-c3-mini-1
I can use arduino to flash stuff, but the script never starts.
Serial monitor show 0x7 and 0x10 on repeating cycle.
I think it needs series of pin setting on boot to work.
https://arduino.stackexchange.com/questions/86177/how-arduino-ide-work-with-esp32
/ESP32-C3 (revision v0.3) flash output example
to watch: troubleshooting esp32 c3 mini https://www.youtube.com/watch?v=pNJBaWZ_vj0
ESP32 C3 mini
forum serch c3 mini:
https://esp32.com/search.php?keywords=mini&fid%5B0%5D=19
hits to follow up:
https://esp32.com/viewtopic.php?f=19&t=35137&p=118768&hilit=mini#p118768
https://esp32.com/viewtopic.php?f=19&t=35137&p=118359&hilit=mini#p118359
to try: https://docs.espressif.com/projects/esp-idf/en/v4.3/esp32c3/api-guides/bootloader.html esp-idf factory reset process
I could not get this to worrk: https://docs.espressif.com/projects/esp-at/en/latest/esp32c3/Get_Started/Hardware_connection.html
esptool.py under windows used :
C:\Users\user>C:\Users\north\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.11_qbz5n2kfra8p0\LocalCache\local-packages\Python311\Scripts\esptool.py.exe --chip esp32c3 --port COM10 flash_id esptool.py v4.5.1 Serial port COM10 Connecting.... Chip is ESP32-C3 (revision v0.3) Features: WiFi, BLE Crystal is 40MHz MAC: 58:cf:79:e3:1d:d8 Uploading stub... Running stub... Stub running... Manufacturer: 20 Device: 4016 Detected flash size: 4MB Hard resetting via RTS pin...
esp32 stuff
<a href="/index.php/File:Esp32-c3_devkitM-1_pinlayout.png" class="image"><img alt="Esp32-c3 devkitM-1 pinlayout.png" src="/images/e/e0/Esp32-c3_devkitM-1_pinlayout.png" decoding="async" width="400" height="300"></a>
so which pins are for I2C SDA/SCL ?
Lots of conflicting docs.
I forced the issue like this:
void setup() { Wire.setPins(sda_pin, scl_pin); Wire.begin(); ... }
want to make the on board neopixel work? use the neopixel library and set pin to 8.
Here is a web server that exposes BME 280 sensors in a prometheus friendly way:
- uses neopixel to communicate wifi communication status
- uses serial for diag debug output.
ESP32-C3 Mini Development Board
sparkfun board
aka WRL-18036
basedon ESP32-C3-MINI-1 chip
https://www.sparkfun.com/products/18036
gotchas:
set I2C wires to pin 0 and pin1 , means pin 9 and 10 on the board
#define I2C_SDA 0 #define I2C_SCL 1 ... void setup() { Wire.setPins(I2C_SDA, I2C_SCL); Wire.begin(); ... }
Scripts
- /esp32_i2c_scanner - it's possible to talk i2c over several pairs. In fact it's not clear if the default works. https://docs.espressif.com/projects/arduino-esp32/en/latest/tutorials/io_mux.html#usage-examples