Soap - Lunch and Learn Presentation

Slide 1

Why do it? "I can do that." "I want to know what is in my soap." "My skin is sensitive."

Why not? "It's dangerous." "What chemicals?" "Where can I get the chemicals?"

Slide 2 - What you need

A recipe

Before anything else you need a recipe. i.e. a plan. This will inform the rest of your steps.

Are you doing a 500 gr batch, or a 2kg batch?

Are you using hard oils, or soft? or some mix ?

Are you using KOH or NaOH?

Will you use additives like essential oils or clay ? How much?

https://www.thesage.com/calcs/LyeCalc.html

There as lots of ideas at the library and online.

About 50% of the recipes are crap because they say something like : Melt some Castile soap and add colour and smell. Which is not helpful if you are _actually_ making the soap.

Protective Equipment

• Goggles
• Gloves
• Apron
• Surface covering

Equipment

• Two pots, ideally stainless steel - NOT aluminum, the lye will eat the aluminum
• A thermometer
• Stainless steel spoon
• Silicone Spatula
• Hand mixer , Braun et el - This makes mixing an attainable chore , not arm breaking.

Optional: Cock pot

Valu Village is a great place to get what you need and not break the bank. Although if you are fastidious you can use the same stuff as you use for food, better to have dedicated equipment.

• Moulds - Where you pour the finished soap to cure.
  • I use silicone muffin moulds
  • old milk or soy tetra-pak boxes
  • various containers around the house
  • Fancy ice-cube trays can work.
  • and you can get purpose made moulds for soap.

Key points:

• heat resistant
• not porous
• not too rigid - as you need to get the soap out afterwards.

Lye

This is the lone primary dangerous chemical I spoke about above.

It is Corrisive ! which means that it will melt a hole in you if it comes into contact with your skin.

This is why we wear protective equipment.

If you get any one you the first thing you will notice is that you skin is "slippery" almost like soap.

RINSE IMMEDIATELY with Large amounts of cold water.

I've heard that vinegar is good to have on hand as it neutralizes it.

Lye can be tough to source.

Home hardware does have it

https://www.homehardware.ca/search?query=lye

• 500g $8.49 /EA
• 3kg $29.99 /EA

† Keep in mind very little Alkali is required; for a 500 ml of oil recipe, 66 grams of NaOH is required.

Can do Kajiji and Amazon.ca as well.

Places that do not carry lye:

• Canadian Tire
• Rona
• Home despot

Oil

Any oil will work but different oils will change your recipe slightly.

Coconut oil is a "Hard" oil, Olive oil is a soft oil.

Water

Small amounts are required, the less you use , the sooner you soap will be cured. The more you use the more help you have getting the reagents to react with each other.

Fragrances and Additives

This stuff is optional

• Essential oils
• Extracts
• Particles of stuff:
  • Charcoal
  • oatmeal
  • lavender buds

• Milk
• honey
• bee's wax
• Clay
• apricot / almond grit
• colourants
• sparkles

Slide 2

Ingredients

Stong Alkalie

Doing it at home

Ingredients

- NaOH - Oils

Slide 3

properties of soal and how ingredients affect it.

Slide 4

Where to go from here

get a sample of NaOH from David:

glass jar

oils good choices

Slide 5

Advanced topics:

• Potassium hydroxide ( KOH ) Versus Sodium Hydroxide ( NaOH )
• Trying oil combos.
• Glycerine soap ( Transparent Soap )

https://laney.edu/cheli-fossum/wp-content/uploads/sites/210/2012/01/13-Saponification.pdf

Bonus Slide 6 - Glycerine soap

I want to do this.

Adding alcohol to soap basically to makes it transparent.

Process:

• Heat the soap until melted
• Add alcohol
• skim off sap from the top.

Bonus Slide 7 - Oil options

Hard oils versus Soft oils

https://www.lovinsoap.com/oils-chart/

My mixes, experiments and refinements : Soap

• Coconut -> hard

• Olive oil -> soft

What mixes is good?