Cydonia: Difference between revisions
From Federal Burro of Information
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 77: | Line 77: | ||
05:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) | 05:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) | ||
05:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) | 05:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) | ||
</pre> | |||
==lm_detect== | |||
sensors-detect gives:; | |||
<pre> | |||
* Bus `SMBus I801 adapter at 3000' | |||
Busdriver `i2c-i801', I2C address 0x2d | |||
Chip `SMSC LPC47M15x/192/292/997' (confidence: 6) | |||
Driver `smsc47m1' (should be inserted): | |||
Detects correctly: | |||
* ISA bus, address 0x680 | |||
Chip `SMSC LPC47M15x/192/997 Super IO Fan Sensors' (confidence: 9) | |||
</pre> | |||
/usr/bin/sensors gives: | |||
<pre> | |||
smsc47m192-i2c-0-2d | |||
Adapter: SMBus I801 adapter at 3000 | |||
+2.5V: +2.53 V (min = +0.00 V, max = +3.32 V) | |||
VCore: +1.15 V (min = +0.00 V, max = +2.99 V) | |||
+3.3V: +3.32 V (min = +0.00 V, max = +4.38 V) | |||
+5V: +4.95 V (min = +0.00 V, max = +6.64 V) | |||
+12V: +11.94 V (min = +0.00 V, max = +15.94 V) | |||
VCC: +3.33 V (min = +0.00 V, max = +4.38 V) | |||
+1.5V: +1.56 V (min = +0.00 V, max = +1.99 V) | |||
+1.8V: +1.77 V (min = +0.00 V, max = +2.39 V) | |||
Chip Temp: +43.0 C (low = -127 C, high = +127 C) | |||
CPU Temp: +59.0 C (low = -127 C, high = +50 C) | |||
Sys Temp: +47.0 C (low = -127 C, high = +127 C) | |||
vid: +2.050 V (VRM Version 8.2) | |||
smsc47m1-isa-0680 | |||
Adapter: ISA adapter | |||
fan1: 0 RPM (min = 1280 RPM, div = 4) ALARM | |||
fan2: 6826 RPM (min = 1280 RPM, div = 4) | |||
</pre> | </pre> | ||
[[Category:Computers]] | [[Category:Computers]] | ||
Revision as of 22:01, 17 August 2009
Home server
motherboard: D945GCLF
processor: atom 230 (64 bit profile) intel product page
- onboard realtek card is no good.
- might be issues with random number generator.
- install Dlink DECchip quad ethernet card ( tulip driver )
from "safe cflags gentoo page:
Atom
Some Intel engineer put a guide on stable CFLAGS for atom procesor. In summary, he said that this are the "suggested" CFLAGS: -Wall -O1 -msse3 -march=core2 -mfpmath=sse -pedantic -pipe -fstrength-reduce -fexpensive-optimizations -finline-functions -funroll-loops -foptimize-register-move
Atom 230
vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping : 2 cpu MHz : 1596.175 cache size : 512 KB
32 bit profile (x86):
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"
64 bit profile (amd64):
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe"
CXXFLAGS="${CFLAGS}"
Make.conf
1st attempt
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-Wall -O2 -msse3 -march=nocona -mfpmath=sse -pipe -fstrength-reduce -fexpensive-optimizations -finline-functions -funroll-loops -foptimize-register-move"
CXXFLAGS="${CFLAGS}"
lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 02) 04:00.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 05:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 05:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 05:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 05:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
lm_detect
sensors-detect gives:;
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x2d
Chip `SMSC LPC47M15x/192/292/997' (confidence: 6)
Driver `smsc47m1' (should be inserted):
Detects correctly:
* ISA bus, address 0x680
Chip `SMSC LPC47M15x/192/997 Super IO Fan Sensors' (confidence: 9)
/usr/bin/sensors gives:
smsc47m192-i2c-0-2d Adapter: SMBus I801 adapter at 3000 +2.5V: +2.53 V (min = +0.00 V, max = +3.32 V) VCore: +1.15 V (min = +0.00 V, max = +2.99 V) +3.3V: +3.32 V (min = +0.00 V, max = +4.38 V) +5V: +4.95 V (min = +0.00 V, max = +6.64 V) +12V: +11.94 V (min = +0.00 V, max = +15.94 V) VCC: +3.33 V (min = +0.00 V, max = +4.38 V) +1.5V: +1.56 V (min = +0.00 V, max = +1.99 V) +1.8V: +1.77 V (min = +0.00 V, max = +2.39 V) Chip Temp: +43.0 C (low = -127 C, high = +127 C) CPU Temp: +59.0 C (low = -127 C, high = +50 C) Sys Temp: +47.0 C (low = -127 C, high = +127 C) vid: +2.050 V (VRM Version 8.2) smsc47m1-isa-0680 Adapter: ISA adapter fan1: 0 RPM (min = 1280 RPM, div = 4) ALARM fan2: 6826 RPM (min = 1280 RPM, div = 4)
