Susan

Todo

• cpu frequewncy scaling
• powertop
  • CONFIG_TIMER_STATS
• ACPI
• power saving disk
• monitoring
• snmp
• modem - HSF - lots of trouble. hsf doesn't like amd.
• wireless
• gaadgets
• webcams
• tune kernel
  • drtaab - pared down modules list.
  • drtaac - added powertop recommendations

Config of Note

/etc/conf.d/local.start

echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo 1 > /sys/module/snd_hda_intel/parameters/power_save

see also: http://www.gentoo.org/doc/en/openrc-migration.xml?style=printable

Hardware

• CPU: AMD Athlon(tm) 64 Processor 3500+
  • cpufreq: powernow_k8
• RAM : DDR2 1GB
• HDD 30 ide
• storage controller:

• video GeForce 6150 LE
• MCP51 High Definition Audio
• MCP51 Ethernet Controller - not used
• Conexant Systems, Inc. HSF 56k Data/Fax Modem
• Wireless: Ralink corp. RT2561/RT61 802.11g PCI
• Quad port 10/10 ethernet: Tulip ( DECchip 21142/43 (rev 41))
• usb camera:
  • usb 2-1: New USB device found, idVendor=0c45, idProduct=602c
  • usb 2-5: New USB device found, idVendor=0c45, idProduct=6029

Build notes

new build for server susan

mkfs.ext2 /dev/hda1
mkfs.ext3 /dev/hda3
mkswap /dev/hda2


/dev/hda1: UUID="a6b1226e-34e0-4d2e-955f-56c52ea60339" TYPE="ext2"
/dev/hda2: UUID="a4452166-b64b-48f8-83ee-dfe840480c1c" TYPE="swap"
/dev/hda3: UUID="f6bdfa33-f143-46e2-b034-d0483529f4a0" SEC_TYPE="ext2" TYPE="ext3"

swapon /dev/hda2

mount /dev/hda1 /mnt/gentoo
mkdir /mnt/gentoo/boot

MMDDhhmmYYYY syntax (Month, Day, hour, minute and Year). 

date 092314222012

FAILED:
mirrorselect -i -o >> /mnt/gentoo/etc/portage/make.conf
mirrorselect -i -r -o >> /mnt/gentoo/etc/portage/make.conf

manual:

GENTOO_MIRRORS="http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/"
SYNC="rsync://rsync.ca.gentoo.org/gentoo-portage"

mount -t proc none /mnt/gentoo/proc
mount --rbind /sys /mnt/gentoo/sys
mount --rbind /dev /mnt/gentoo/dev

chroot /mnt/gentoo /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"


SYNC="rsync://rsync4.ca.gentoo.org/gentoo-portage"

Storage controllers

product: MCP51 IDE , uses CONFIG_BLK_DEV_AMD74XX

product: MCP51 Serial ATA Controller x 2 ( all sata header have been torn off, hence it's place at the end of someone's driveway )

modules:

4 pata_amd                9908  4

Disk

just one.

/dev/sda:

 Model=WDC WD300EB-75CPF0, FwRev=06.04G06, SerialNo=WD-WMAAT9825720
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
 RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=1
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58633344
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5

 * signifies the current active mode

Wireless

Wireless: Ralink corp. RT2561/RT61 802.11g PCI

modules loaded:

1 led_class               2398  1 rt2x00lib
1 rfkill                 13313  1 cfg80211
1 rt2x00pci               4388  1 rt61pci
2 cfg80211              139297  2 rt2x00lib,mac80211
2 mac80211              173491  2 rt2x00pci,rt2x00lib
2 rt2x00lib              29364  2 rt61pci,rt2x00pci

Sensors

sensor-detect notes:

• AMD K8 thermal sensors
• SMSC DME1737 Super IO
• i2c-nforce2 - no response.