Borg
From Federal Burro of Information
- pentium 4 box
- gentoo circa 2013
- inheirited from Nab ( contra for some AGP video cards )
- dual wifi cards
- 80 system disk
- 2 X 250 GB data disks
- 192.168.1.67
todo
- clean up kernel
- setup data disks
- get wireless up and running
- generate dictionaries
- setup processing jobs
Kernel
started with stock genkernel - yuck
Disk
borg / # blkid /dev/sda1: LABEL="BORGDATA1" UUID="3b1e6c05-4fef-4380-a2bf-e7da49380f9a" TYPE="ext4" /dev/sdb1: LABEL="BORGDATA2" UUID="e6643998-d0a8-4bd3-a382-3607ffa02af1" TYPE="ext4" /dev/sdc1: LABEL="BOOT" UUID="17dea7a1-7d05-4212-a901-6796a16e34f7" TYPE="ext2" /dev/sdc2: UUID="ba0d9f0b-1e7e-4fd9-830a-899e3337d3b5" TYPE="swap" /dev/sdc3: LABEL="ROOT" UUID="d66785fd-51c6-45a5-89c2-8a47f0279f8e" TYPE="ext4"
lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge 00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) 00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge 00:11.7 Host bridge: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge 00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge 01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01) 02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port 02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port 02:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller 05:08.0 Network controller: Ralink corp. RT2561/RT61 802.11g PCI 05:09.0 Network controller: Ralink corp. RT2800 802.11n PCI
Sensors
- ITE IT8712F Super IO Sensors detected
- i2c-viapro loaded
ACPItool
borg ~ # /usr/bin/acpitool -e Kernel version : 3.7.10-gentoo - ACPI version : 20120913 ----------------------------------------------------------- Battery status : <not available> AC adapter : <info not available or off-line> Fan : <not available> CPU type : Intel(R) Pentium(R) 4 CPU 2.66GHz CPU speed : 0x3 MHz Cache size : 2659.963 KB Bogomips : 5319.92 Function Show_CPU_Info : could not read directory /proc/acpi/processor/ Make sure your kernel has ACPI processor support enabled. Thermal info : <not available> Device S-state Status Sysfs node --------------------------------------- 1. UAR1 S4 *disabled pnp:00:05 2. PS2K S4 *enabled pnp:00:09 3. ILAN S4 *disabled pci:0000:00:12.0 4. P7P8 S4 *disabled pci:0000:02:00.0 5. P7P9 S4 *disabled pci:0000:02:00.1 6. P2PB S4 *disabled pci:0000:00:13.1 7. PCI1 S4 *disabled 8. PCI2 S4 *disabled 9. USB1 S4 *enabled pci:0000:00:10.0 10. USB2 S4 *enabled pci:0000:00:10.1 11. USB3 S4 *enabled pci:0000:00:10.2 12. USB4 S4 *enabled pci:0000:00:10.3 13. EHCI S4 *enabled pci:0000:00:10.4 14. SLPB S4 *disabled borg ~ #
