Esp32
esp32-c3-devkitC-02
I got some esp32-c3-devkitC-02
from the hardware schematic i seethe RGB LED is SK68XXMINI-HS
I used adafruit neopixel library to drive this RGB LED. it's one wire or i2c or something. Pin 8
talk to it via I2C
damn trying to get the boot flashed.
this is what I'm going on now:
https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html
board manager extras:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json
old config:
https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json
This page has some particulars:
https://www.smart-prototyping.com/blog/How%20to%20Install-ESP32-Core-Arduino-IDE
c3 02
image:esp32-c3_devkitM-1_pinlayout.png
esp32 c3 devkitm-1 ( mini)
I'm having a lot of trouble with esp32-c3-mini-1
I can use arduino to flash stuff, but the script never starts.
Serial monitor show 0x7 and 0x10 on repeating cycle.
I think it needs series of pin setting on boot to work.
https://arduino.stackexchange.com/questions/86177/how-arduino-ide-work-with-esp32
/ESP32-C3 (revision v0.3) flash output example
to watch: troubleshooting esp32 c3 mini https://www.youtube.com/watch?v=pNJBaWZ_vj0
ESP32 C3 mini
forum search c3 mini:
https://esp32.com/search.php?keywords=mini&fid%5B0%5D=19
- Can't program ESP32-MINI-1 over serial despite "Waiting for Download"
- https://stackoverflow.com/questions/74819838/cant-program-esp32-mini-1-over-serial-despite-waiting-for-download
hits to follow up:
- ESP32-S3-MINI-1 wouldn't start
- https://esp32.com/viewtopic.php?f=19&t=35137&p=118359&hilit=mini#p118359
- https://esp32.com/viewtopic.php?f=19&t=35137&p=118768&hilit=mini#p118768
- ESP32-C3-MINI-1U reboot loop when switching GPIO7
- https://esp32.com/viewtopic.php?t=27152
to try: https://docs.espressif.com/projects/esp-idf/en/v4.3/esp32c3/api-guides/bootloader.html esp-idf factory reset process
I could not get this to worrk: https://docs.espressif.com/projects/esp-at/en/latest/esp32c3/Get_Started/Hardware_connection.html
esptool.py under windows used :
C:\Users\user>C:\Users\north\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.11_qbz5n2kfra8p0\LocalCache\local-packages\Python311\Scripts\esptool.py.exe --chip esp32c3 --port COM10 flash_id esptool.py v4.5.1 Serial port COM10 Connecting.... Chip is ESP32-C3 (revision v0.3) Features: WiFi, BLE Crystal is 40MHz MAC: 58:cf:79:e3:1d:d8 Uploading stub... Running stub... Stub running... Manufacturer: 20 Device: 4016 Detected flash size: 4MB Hard resetting via RTS pin...
- Solution
The first thing I did was get esp-idf and try it's hellow world. that worked.
then I googled somemore and someone said: set flash mode to DIO, not QIO.
Sure enough I was set to QIO , I set to DIO and suddenly stuff starts wirking.
note I'm betting that I did not choose the correct board in arduino ide board manager. I was faffing about with "ESP32 C3" , "ESP32 S3 mini", "ESP32 C3 Dev module".
the vendor's docs for esp-idf mention that with dev board "menuconfig" should have "disable multi cpu", this indicate that in arduino not using the "Dev Module" option might have some material difference.
Anywho, I can get the neo pixel hello world in arduino to work now, so I'm happy ( recall GPIO 8 is the address for the neo pixel lirbary to use for this board , same as the previous ESP32 that I used.
esp32 stuff
<a href="/index.php/File:Esp32-c3_devkitM-1_pinlayout.png" class="image"><img alt="Esp32-c3 devkitM-1 pinlayout.png" src="/images/e/e0/Esp32-c3_devkitM-1_pinlayout.png" decoding="async" width="400" height="300"></a>
so which pins are for I2C SDA/SCL ?
Lots of conflicting docs.
I forced the issue like this:
void setup() { Wire.setPins(sda_pin, scl_pin); Wire.begin(); ... }
want to make the on board neopixel work? use the neopixel library and set pin to 8.
Here is a web server that exposes BME 280 sensors in a prometheus friendly way:
- uses neopixel to communicate wifi communication status
- uses serial for diag debug output.
esp32 c3 dev module i2c pins :
if you use pins 6 and 7 yo ucahn define like this in the scanner program:
#define I2C_SDA 6 #define I2C_SCL 7
ESP32-C3 Mini Development Board
sparkfun board
aka WRL-18036
basedon ESP32-C3-MINI-1 chip
https://www.sparkfun.com/products/18036
gotchas:
set I2C wires to pin 0 and pin1 , means pin 9 and 10 on the board
#define I2C_SDA 0 #define I2C_SCL 1 ... void setup() { Wire.setPins(I2C_SDA, I2C_SCL); Wire.begin(); ... }
Scripts
- /esp32_i2c_scanner - it's possible to talk i2c over several pairs. In fact it's not clear if the default works. https://docs.espressif.com/projects/arduino-esp32/en/latest/tutorials/io_mux.html#usage-examples