Home Notes: Difference between revisions

From Federal Burro of Information
Jump to navigationJump to search
(New page: == Claw Foot Tub Notes == * we shopped around for a bit, the best price we found was 195 dollars from the guy on queen by dovercourt, Royal, but they were pretty beat up. * ~~~ Bought a s...)
 
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Claw Foot Tub Notes ==
== Claw Foot Tub Notes ==


* we shopped around for a bit, the best price we found was 195 dollars from the guy on queen by dovercourt, Royal, but they were pretty beat up.
* We shopped around for a bit for a claw foot tub in Toronto.
* [[User:David|David]] Bought a second-hand cast iron clawfoot tub from [http://www.habitat.ca/restoresc648.php Restore], complete with cast iron feet, facets, and shower pipine and curtain rail for $350 cnd.
* The best price we found was 195 dollars from the guy on queen by dovercourt, Royal, but they were pretty beat up, no hardware.
** It was not in perfect shape, but in reasonable shape.
* The "worst" price we found was a brand new tub at "taps" for $1100, and matching fitting for 1000$
** The chrome all needed a good cleaning which was done with you basic bathroom cleaning supplied and a good 3M scrubby.
* Bought a second-hand cast iron clawfoot tub from [http://www.habitat.ca/restoresc648.php Restore], complete with cast iron feet, facets, and shower pipine and curtain rail for $350 cnd.
** half of the unit had 4 coats of paint on it and the other half had 2 coats.
* It was not in perfect shape, but in reasonable shape.
* The chrome all needed a good cleaning which was done with you basic bathroom cleaning supplied and a good 3M scrubby.
* half of the unit had 4 coats of paint on it and the other half had 2 coats.
* the tub's exterior was brushed down with a stiff wire brush, then painted with a coat or two of tremclad.
* the feet were stripped, first with acetone, then with Bher's "The Stripper", all done outside, over time, many repetitions.
* after 99% of the crap was off the feet I took a wire brush dremel tool and buffed up the feet.
* They were then coated with Tremclad Polyeurethane.
 
== Getting rid o building waste ==
 
Use city of toronto transfer stations. I took a half a minivan of stuff to the transfer station on bermunsy and it cost me 12.50$ and 28 minutes.
 
== To check out ==
 
* http://www.legacyvintage.com/
 
== Brick ==
 
From Holmes on Homes:
 
* get an expert
* consider bonder which helps mortar "stick" to brick.
* the expert should remove at least 5/8" of the old mortar before putting in more working.
* caulking not recommended.
 
== Also See ==
 
[[Garden Notes]]
 
[[Houseplants]]

Latest revision as of 01:46, 30 June 2012

Claw Foot Tub Notes

  • We shopped around for a bit for a claw foot tub in Toronto.
  • The best price we found was 195 dollars from the guy on queen by dovercourt, Royal, but they were pretty beat up, no hardware.
  • The "worst" price we found was a brand new tub at "taps" for $1100, and matching fitting for 1000$
  • Bought a second-hand cast iron clawfoot tub from Restore, complete with cast iron feet, facets, and shower pipine and curtain rail for $350 cnd.
  • It was not in perfect shape, but in reasonable shape.
  • The chrome all needed a good cleaning which was done with you basic bathroom cleaning supplied and a good 3M scrubby.
  • half of the unit had 4 coats of paint on it and the other half had 2 coats.
  • the tub's exterior was brushed down with a stiff wire brush, then painted with a coat or two of tremclad.
  • the feet were stripped, first with acetone, then with Bher's "The Stripper", all done outside, over time, many repetitions.
  • after 99% of the crap was off the feet I took a wire brush dremel tool and buffed up the feet.
  • They were then coated with Tremclad Polyeurethane.

Getting rid o building waste

Use city of toronto transfer stations. I took a half a minivan of stuff to the transfer station on bermunsy and it cost me 12.50$ and 28 minutes.

To check out

Brick

From Holmes on Homes:

  • get an expert
  • consider bonder which helps mortar "stick" to brick.
  • the expert should remove at least 5/8" of the old mortar before putting in more working.
  • caulking not recommended.

Also See

Garden Notes

Houseplants