Htu21d.py: Difference between revisions

From Federal Burro of Information
Jump to navigationJump to search
No edit summary
No edit summary
Line 130: Line 130:




[[Category:script]]
[[Category:Script]]

Revision as of 14:13, 10 July 2020

Script

run this on your raspberry pi.

#!/usr/bin/python
# From: https://www.raspberrypi.org/forums/viewtopic.php?f=44&t=76688
import struct, array, time, io, fcntl

I2C_SLAVE=0x0703
HTU21D_ADDR = 0x40
CMD_READ_TEMP_HOLD = "\xE3"
CMD_READ_HUM_HOLD = "\xE5"
CMD_READ_TEMP_NOHOLD = "\xF3"
CMD_READ_HUM_NOHOLD = "\xF5"
CMD_WRITE_USER_REG = "\xE6"
CMD_READ_USER_REG = "\xE7"
CMD_SOFT_RESET= "\xFE"

class i2c(object):
   def __init__(self, device, bus):

      self.fr = io.open("/dev/i2c-"+str(bus), "rb", buffering=0)
      self.fw = io.open("/dev/i2c-"+str(bus), "wb", buffering=0)

      # set device address

      fcntl.ioctl(self.fr, I2C_SLAVE, device)
      fcntl.ioctl(self.fw, I2C_SLAVE, device)

   def write(self, bytes):
      self.fw.write(bytes)

   def read(self, bytes):
      return self.fr.read(bytes)

   def close(self):
      self.fw.close()
      self.fr.close()

class HTU21D(object):
   def __init__(self):
      self.dev = i2c(HTU21D_ADDR, 1) #HTU21D 0x40, bus 1
      self.dev.write(CMD_SOFT_RESET) #soft reset
      time.sleep(.1)

   def ctemp(self, sensorTemp):
      tSensorTemp = sensorTemp / 65536.0
      return -46.85 + (175.72 * tSensorTemp)

   def chumid(self, sensorHumid):
      tSensorHumid = sensorHumid / 65536.0
      return -6.0 + (125.0 * tSensorHumid)

   def crc8check(self, value):
      # Ported from Sparkfun Arduino HTU21D Library: https://github.com/sparkfun/HTU21D_Breakout
      remainder = ( ( value[0] << 8 ) + value[1] ) << 8
      remainder |= value[2]
      
      # POLYNOMIAL = 0x0131 = x^8 + x^5 + x^4 + 1
      # divsor = 0x988000 is the 0x0131 polynomial shifted to farthest left of three bytes
      divsor = 0x988000
      
      for i in range(0, 16):
         if( remainder & 1 << (23 - i) ):
            remainder ^= divsor
         divsor = divsor >> 1
      
      if remainder == 0:
         return True
      else:
         return False
   
   def read_tmperature(self):
      self.dev.write(CMD_READ_TEMP_NOHOLD) #measure temp
      time.sleep(.1)

      data = self.dev.read(3)
      buf = array.array('B', data)

      if self.crc8check(buf):
         temp = (buf[0] << 8 | buf [1]) & 0xFFFC
         return self.ctemp(temp)
      else:
         return -255
         
   def read_humidity(self):
      self.dev.write(CMD_READ_HUM_NOHOLD) #measure humidity
      time.sleep(.1)

      data = self.dev.read(3)
      buf = array.array('B', data)
      
      if self.crc8check(buf):
         humid = (buf[0] << 8 | buf [1]) & 0xFFFC
         return self.chumid(humid)
      else:
         return -255
         
if __name__ == "__main__":
   obj = HTU21D()
   print "Temp:", obj.read_tmperature(), "C"
   print "Humid:", obj.read_humidity(), "% rH"

Also see Arduino Projects of note/datalogger sdcard

gnuplot sutff:

http://www.kleerekoper.co.uk/2014/05/how-to-create-heatmap-in-gnuplot.html

Take 2

use i2c libs

use smbus libs.

https://www.instructables.com/id/Raspberry-Pi-I2C-Python/

https://pypi.org/project/smbus2/

https://learn.sparkfun.com/tutorials/htu21d-humidity-sensor-hookup-guide/all

great project: https://github.com/rieder91/pi-co2

idea / plan:

make a service that exports the data via /metric web service, then tell prometheus to eat it . ha ha ! I did that-> https://github.com/drthornt/htu21d-exporter