Electronics

From Federal Burro of Information
Jump to navigationJump to search

Basics

How-To: Build BEAM Vibrobots
http://www.streettech.com/modules.php?op=modload&name=News&file=article&sid=1618&mode=flat&order=0&thold=1

Lecture 1 - Background and Power Supply
http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=57&page=7

FM Transmitter
http://africatravels.pbwiki.com/RadioTransmitterCircuits

Useful bits

1381 voltage detector
http://members.aon.at/sunbeam/1381.htm
http://www.solarbotics.com/products/1381/

pn2222 transistor
insert url (how is this useful?, see at http://cachefly.oreilly.com/make/television/08/MiniRobots.pdf ) http://www.solarbotics.com/products/tr2222/

DS2405 Addressable 1-wire Switch
http://rjconway.homeip.net/wordpress/wp-content/uploads/2008/05/ds2405.pdf

for controlling larger power:
Power Solid State Relay
http://rjconway.homeip.net/wordpress/wp-content/uploads/2008/05/ssr-sc842110.pdf

battery meter:
http://profmason.com/?p=689

mulit chemistry battery charger http://members.shaw.ca/Botgoodies2/MultiCharger/MultiCharger.htm

Addressable Dual Digital Potentiometer - DS1803
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2779/ln/en

Using an Analog Voltage to Control a Digital Potentiometer
http://pdfserv.maxim-ic.com/en/an/AN4051.pdf

Notes on batteries, including notes on Charge Controllers.
http://www.solar-electric.com/deep_cycle_batteries/deep_cycle_battery_faq.htm

http://en.wikipedia.org/wiki/Battery_charger

Notes on battery desulfinator http://screwdecaf.cx/mini-d.html

Generating Electricity with Stepper Motors
http://www.c-realevents.demon.co.uk/steppers/stepmotor.htm

MultiTherm ( gather temp data from multiple Dallas Semiconductor DS18x20 1-Wire® Thermometers
http://www.thebloughs.net/hobbies/electronics/multitherm/

K145 Temperature Monitor Data Logger
http://nashdb.tripod.com/K145.htm

ZOMG Cheap DS1820
http://www.taydaelectronics.com/servlet/the-125/DS18S20-DS1820-1-Wire/Detail

1N4004 - diode/rectifier

LM 35

http://www.facstaff.bucknell.edu/mastascu/elessonshtml/Sensors/TempLM35.html

Digital voltmeter

Build an Analog Bar Graph Expanded Scale Voltmeter
http://www.stefanv.com/electronics/esv.html

MOSFET versus Optisiloator Triac Driver

just took a bunch of MOSFETs off some old mother boards.

So what's the difference between a MOSFET and an Optoisolator Triac Driver?

A MOSFET can take a small voltage signal and make it large or vica versa, take a large voltage signal and make it small.

not that it might be appropriate to use a different type of MOSFET to convert an analog versus a digital signal.

There are n-type MOSFETs and p-type MOSFET, dunno the diff just yet.

MOSFETs can get complicated as you try to model how well they "translate" signal. an Idea MOSFET translates a signal perfectly, or exactly as you want it to be translated, however in the realworld depending on the configuration and materials, the MOSFET has a certain response to different types of signals such that it's wise to characterize the signal you give it and find a mosfet that's rated for the best response in that range.

Now compare that with an Optoisolating Triac Driver that also might get wired up the same way as a MOSFET, but does a different job. It's meant to protect on curcuit from another.

Here is an example where a doorbell signal controls a camera shutter

http://digital-photography-school.com/how-to-make-a-remote-shutter-release-from-a-doorbell-diy-special

MOCO 3020 Optoisolator Triac Driver - Media:161-12855-0-MOC3010.pdf

the idea I think is that the signal from doorbell is isolated from the shutter control. I play in software alot , so I might liken it to input validation.

You are proecting the delcate camera bits from the door bell bits.


power meter:
http://scriptkiller.de/en/a29/25c3/power_and_energy-meter/


Resistor Guide

So I did some testing with my own multi-meter. I moved the meter's dial from 2000k Ohms, Through 200k, 20k, 2000, all the way to 200 Ohms before I got a reasonable reading from my first resistor. I tested yellow purple gold gold, expecting to get 4.7 Ohms, I got 5.5

  • yellow 4
  • purple 7
  • gold "more the decimal to the left by one.

I test brown green gold gold expecting 1.5 and got 2.5 Ohms.

  • brwon 1
  • green 5
  • gold "more the decimal to the left by one.

I then tested the multi meter on it's own, simply connecting the two leads and got 0.8, this explains the discrepancies good enough for me.

Analog to Digital Converters

Charge controllers

See Also

Retrieved from "https://wiki.quadratic.net/index.php?title=Electronics&oldid=460"